Name: China Sebacic Acid CAS:111-20-6 Manufacturers Suppliers Factory - Wholesale Service - Sinoright
Brand: Sinoright
SKU: 261930359

Product Overview

Product Information	Detail
Product	Sebacic Acid
Chemical Name	Decanedioic Acid
Grade	Industrial Grade
Purity	99.5% Min.
CAS No.	111-20-6
EC No.	203-845-5
Molecular Formula	C10H18O4
Molecular Weight	202.25 g/mol
Available Forms	Powder and granules
Packaging	25 kg PP bags and 500 kg PP bags

Sebacic acid is a ten-carbon dicarboxylic acid used where a long-chain diacid is required for polymerization, esterification, or the preparation of functional derivatives. Buyers can indicate their required form and target specification when requesting documents or a quotation.

Technical Specifications and Representative Batch

Powder and granule forms are both available. The separate representative COA results below show form-specific specifications and actual results for procurement review.

Representative Powder COA Results

The following specifications and actual results are taken from a representative DC10S powder COA.

Item	Specification	Representative Batch Result
Appearance	White powder or flake	White powder
Sebacic Acid	≥99.5%	99.9%
Melting Point	131–135°C	131.2–134.8°C
Water	≤0.3%	0.2%
Ash	≤30 ppm	18 ppm
Iron	≤3 ppm	1 ppm
Total Nitrogen	≤50 ppm	35 ppm
Color at 440/550 nm (T%)	≥96/98	99.7/99.8
Color Stability at 440/550 nm (T%)	≥92/97	98.0/99.3
Hazen / Pt-Co Color	≤15	8

These results provide a quality reference for the powder form and should not be read as specifications or batch results for the granule form.

Representative Granule COA Results

The following specifications and actual results are taken from a representative granule COA.

Item	Specification	Representative Batch Result
Appearance	White granular	White granular
Purity	≥99.5%	99.57%
Ash	≤0.03%	0.01%
Moisture	≤0.30%	0.10%
Color (APHA)	≤15	10
Melting Point	131–134.5°C	132.1–134.1°C

The results above are representative lot data for pre-order quality review and should not be treated as the guaranteed result of every shipment. Shipment quality should be confirmed against the applicable batch-specific COA.

Industrial Applications

Polyamide and Polyester Resins

Derived from castor-oil-based feedstocks, sebacic acid is a bio-based C10 diacid used as a monomer in long-chain polyamides, including PA610, PA810, and PA1010, where its renewable origin can contribute to the bio-based content of the polymer system. It is also used as a building block in selected polyester, copolyester, and polyester-polyol systems.

Sebacate Esters and Low-Temperature Plasticizers

Sebacic acid is an acid feedstock for producing sebacate esters such as dioctyl sebacate (DOS) and dibutyl sebacate (DBS). These derivatives are used as plasticizers in formulations that require flexibility at low temperatures.

Synthetic Lubricants

Sebacate esters derived from sebacic acid are used in synthetic lubricant base fluids and related lubricant formulations. In this value chain, sebacic acid functions as the synthesis raw material rather than the finished lubricant.

Corrosion-Inhibitor and Coolant Systems

Sebacic acid can be converted into sebacate salts, including disodium sebacate, for use as corrosion inhibitors in selected coolant and metal-protection systems.

Hot-Melt Adhesives and Powder Coatings

As a difunctional carboxylic acid building block, sebacic acid is used in selected hot-melt adhesive and powder-coating systems. Buyers should specify the intended formulation or target specification when requesting material for these applications.

Packaging and Documentation

Packaging Option	Procurement Use
25 kg PP bags	Smaller handling units
500 kg PP bags	Larger handling units for bulk requirements

Container Loading Reference

Container	Packaging	Pallet Condition	Reference Loading
20'FCL	25 kg PP bags	Without pallets	18 MT
20'FCL	25 kg PP bags	With pallets	15 MT
20'FCL	500 kg PP bags	With or without pallets	15 MT
40'FCL	25 kg PP bags	With pallets	25 MT
40'FCL	500 kg PP bags	With pallets	22–25 MT, depending on the pallet and stacking arrangement

Container loading should be confirmed for the selected packaging and shipment arrangement when placing an order.

Procurement and Quality Support

Established in 2011, Sinoright has exported products to more than 70 countries and served more than 1,000 customers.

A representative COA can be provided for pre-order quality review.
Each confirmed shipment is supplied with its corresponding batch-specific COA.
Specifications are available for both powder and granule forms.
TDS and SDS are available for procurement and safety review.

Goods undergo quality inspection before shipment. Sinoright accepts inspection by recognized third-party organizations upon request, subject to the agreed order requirements. If a quality issue reported after receipt is confirmed by a recognized third-party organization, the parties can negotiate an appropriate replacement, return, or compensation for reasonable losses based on the verified findings.

Container loading and dispatch are documented. Container-loading photos and relevant shipment records can be provided to the buyer.

Ordering Item	Detail
MOQ	1 FCL
Standard Lead Time	7–15 days
Sample	Up to 200 g free of product charge. Courier cost is initially paid by the buyer and can be credited against a subsequent commercial order.

Storage and Transport

Keep sebacic acid in tightly closed packaging in a cool, dry, and well-ventilated place. Avoid generating airborne dust and keep the material away from ignition sources during handling. Suitable dust control and respiratory protection should be used where dust is generated.

According to the SDS for the offered product, sebacic acid is not regulated as dangerous goods under ADR, RID, ADN, IMDG, ICAO, or IATA transport rules.

Frequently Asked Questions

Q: Can you provide a COA before ordering?

A: Yes. A representative COA for the required powder or granule form can be reviewed during the inquiry stage to compare the offered specifications with representative results. Each confirmed shipment is supplied with its corresponding batch-specific COA.

Q: What is the difference between powder and granule sebacic acid for procurement?

A: Powder is generally considered when finer particle size and dispersion are priorities. Granules may be preferred where cleaner handling, lower dust generation, and material flow are more important. The appropriate form depends on the buyer's feeding equipment, handling system, and downstream process, so buyers should review the corresponding specification and representative COA before selection.

Q: What packaging options are available?

A: Sebacic acid is available in 25 kg PP bags and 500 kg PP bags. Container loading varies with bag size, pallet condition, and container type, so buyers should state the preferred packaging and container size when requesting a quotation.

Q: What is the shelf life of sebacic acid?

A: The shelf life of sebacic acid is 2 years. Buyers should follow the storage guidance and review the applicable product documentation.

Q: Is sebacic acid regulated as dangerous goods for international transport?

A: According to the SDS for the offered product, sebacic acid is not regulated as dangerous goods under ADR, RID, ADN, IMDG, ICAO, or IATA transport rules. Buyers should still review the applicable SDS and confirm destination and carrier requirements for the planned shipment.

Q: What product documents are available for international buyers?

A: Available documentation includes specifications and representative COAs for powder and granule forms, a batch-specific COA supplied with each confirmed shipment, TDS, and SDS. The required document set should be confirmed before ordering.